Wayne-dalton WAYNEMARK 8100 User Manual

Wayne-Dalton Corp.P.O. Box 67 Mt. Hope, OH 44660www.wayne-dalton.comWINDLOAD POSTWayneMark™8000, 8100INSTALLATION INSTRUCTIONS© Copyright 2007 Wayne-D

2HALF HINGE(2) # 130352HEADER LOCK BRACKET(2) # 141092TOP PLATE EXTENSION(1) # 305205TOP STRAP BRACKET(1) # 305206WINDLOAD POST ASSEMBLY# 305207 - (7’

Required Tools3 JR. “A” Frame InstallationIMPORTANT! Refer to the windload specifi cation draw-ings (supplied) for windload post location(s).Place the

Bottom Bracket InstallationLocate the bottom bracket assembly and align it to the bottom of the post. Secure the bottom bracket to the bottom of the

Top Plate Extension InstallationLocate the top plate extension and top strap bracket. Place the top strap bracket onto the top plate extension and ad

6Install side lock on the second section from the bottom of the door. Square side lock assembly with door sec-tion and hole in vertical track. The si

Slide the windload post(s) into storage header bracket(s) and secure the bottom strap(s) to the half hinge(s) using the 3-1/2” carriage bolt and wing

321Windload Label LocationsAttaching the Installation DecalsAfter the installation is complete, locate in a obviously visible location on the inside o