DS-75/DS-100 MINI ROLL-UP DOORS INSTALLATION INSTRUCTIONS IMPORTANT NOTICE !! Read the enclosed instructions careful
II: DS-50 & 100 ‘C’ Stop-Clip Attachment: For doors with an aluminum bottom bar, a ‘C’ stop-clip will need to be installed. Only one bolt is req
STEP 12 INSTALLING THE OPTIONAL TENSION-PRO SPRING ADJUSTMENT BRACKET STEP #12a: Install the Tension-Pro™ bracket
To Increase Spring Tension: Move the door to the fully open position and place clamps on the guides to prevent door from closing.
Roll-Up Sheet Door LIMITED WARRANTY Wayne-Dalton P.O. Box 67- Mt. Hope, Ohio 44660 The Manufacturer warrants the ROLL-UP SHEET DOOR and hardware
Limited Warranty for Paint on the following Wayne-Dalton products Roll-Up Doors Model Nos. • DS 50, • DS 75, • DS 100, • DS 200, • DS 350 Interio
15 This limited warranty applies to the effects of weathering and does not apply to other causes of degradation, such as in the case of (by way of e
F. Other Terms. This limited warranty is made to the Original Owner, exclusively, and not to anyone who or which subsequently owns or possesses th
IMPORTANT SAFETY NOTICES Read the enclosed instructions carefully before attempting installation. If there are any questions about any of the procedu
INTRODUCTION This manual's main function is to assist the installer in correctly installing the doors to ensure safe operation. Compliance with
STEP 1 UNPACKING DOORS Before removing the door from any packaging, inspect the packaging for visible signs of damage. If damage is noted, file a f
STEP 3 INSTALLING MOUNTING ANGLES AND GUIDES Obtain the appropriate Bolt Line (BL) measurement from the chart below. Use opening width listed on th
6 7. Install the bottom bar stops with the same 5/16-18 x 5/8” truss head bolts and flange nuts used to assemble the guides (no washer). Leave the fa
STEP 5 LIFTING THE CURTAIN ASSEMBLY WARNING Curtain assembly is heavy. Allowing curtain assembly to fall while lifting, could result in severe or
STEP 7 PRE-TENSIONING THE DOOR SPRING Spring tension can cause curtain assembly to rotate rapidly, possibly resulting in severe or fatal injury. To
STEP 9 CHECKING AND ADJUSTING SPRING BALANCE Spring tension can cause curtain assembly to rotate rapidly, possibly resulting in severe or fatal inj
Comments to this Manuals