Wayne-dalton 3014 User Manual download pdf (Page 2)

Table of Contents

Important Safety Instructions For Installation And Use 2.

Bracket Installation 3.

Wiring Installation “Quantum™/Classicdrive™” 4.

Wiring Installation “DoorMaster™” 4.

Wiring Installation “idrive™” 5.

Wiring Installation “Torsion idrive™” 5.

Photoelectric Safety Sensor Alignment 6.

Photoelectric Obstruction Sensing Test 6.

Important Safety Instructions 7.

Warranty 7.

Customer Service Number 7.

IMPORTANT SAFETY INSTRUCTIONS FOR

INSTALLATION AND USE

DO NOT USE SENSITIVITY

ADJUSTMENT TO COMPENSATE

FOR A POORLY OPERATING DOOR.

THIS WILL INTERFERE WITH THE

PROPER OPERATION OF THE

SAFETY REVERSE MECHANISM.

AFTER INSTALLING OPENER,

THE DOOR MUST REVERSE

WHEN IT CONTACTS A 1 INCH

HIGH SOLID TEST OBJECT ON

THE FLOOR.

DO NOT CONNECT OPENER TO

ELECTRICAL OUTLET UNTIL

INSTRUCTED TO DO SO.

OPEN DOOR MUST NOT CLOSE

AND CLOSING DOOR MUST

OPEN IF PHOTOELECTRIC

SYSTEM IS OBSTRUCTED BY

6”X HIGH OBJECT, USING TEST

PROCEDURE DESCRIBED IN

STEP 4.

INSTALLATION AND WIRING MUST

COMPLY WITH LOCAL BUILDING

AND ELECTRICAL CODES.

CONNECT THE POWER CORD TO A

PROPERLY GROUNDED OUTLET.

DO NOT REMOVE ROUND GROUND

PIN FROM POWER CORD.

DO NOT WEAR RINGS, WATCHES

OR LOOSE CLOTHING WHEN

INSTALLING OR SERVICING A

GARAGE DOOR SYSTEM. USE A

STURDY, NONMETALLIC STEP

LADDER AND WEAR EYE

PROTECTION.

WARNING DISCONNECT ALL POWER FROM GARAGE DOOR OPENER BEFORE SERVICING

OR INSTALLING ACCESSORY PRODUCTS.

THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL

PERSONAL INJURY HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS

SYMBOL TO AVOID POSSIBLE INJURY OR DEATH.

READ AND FOLLOW ALL

INSTALLATION INSTRUCTIONS.

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Wayne-dalton 3014 User Manual Page 2

Comments to this Manuals

Related products and manuals for Kitchen Wayne-dalton 3014