Wayne-Dalton Optimal Owner's Manual download pdf (Page 13)

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

Loose

Winding

Shaft

Cable

Drum

Left Hand Side

Single Spring Application

Groove

Flagangle

Torsion

Tube

Shake the Torque Tube gently to extend the

Winding Shafts out about 5" on each side.

For single spring applications, there will be

no left hand spring in the Torque Tube.

Lift the Torque Tube and rest it on the top of

the Flagangles. Orient Torque Tube so that

back of Opener is flat against Header/

Mounting Surface.

NOTE: Cable Drums and Torque Tube are

cam shaped to fit together only one way.

To install the Cable Drum, slide the Cable

Drum over the Winding Shaft until the Cable

Drum seats against the Torque Tube. The

Winding Shaft must extend past the Cable

Drum far enough to expose the Splines and

the Groove.

Align the Winding Shaft Groove with

the round Notch in the Flagangle.

Repeat for opposite side for double spring

applications.

For single spring applications, insert

the loose Winding Shaft into the left hand

Cable Drum prior to sliding the Cable Drum

over the Torque Tube.

NOTE: On single spring applications, take

care in handling the loose Winding Shaft

(left side) so that it does not slide back into

the Torque Tube.

Tools Needed:

None

Drive Gear Installation

Cable Drum Installation

Tools Needed:

Lubricating Oil

Beginning with the right hand side, lubricate

entire circumference of the Drive Gear

with Lubricating Oil. Slide the Drive Gear

onto the Winding Shaft Splines until it

touches the Flagangle.

NOTE: On single spring applications,

no Drive Gear is required on the left side.

NOTE: If additional Lubricating Oil is

required “Dura-Lube Engine Oil Treatment”

is recommended.

Torque

Tube

Winding

Shaft

Cable Drum

Counterbalance

Cable

Torque

Tube

Cable Drum

Round

Notch

Winding

Shaft Groove

Winding

Shaft Splines

Lubricating

Oil

Drive

Gear

Flagangle

Drive

Gear

Winding

Shaft

Cable

Drum

Cable

Drum

IDRIVE

FOR TORQUEMASTER

INSTALLATION

Splines

Groove

Flag Angle

Round

Notch

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 45 46

Comments to this Manuals

No comments

Wayne-Dalton Optimal Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Garage Door Opener Wayne-Dalton Optimal