Wayne-Dalton Optimal Owner's Manual download pdf (Page 32)

Tools Needed:

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

Contact Obstruction Test

After installing the Opener, the door must

reverse when it contacts a 1-1/2” high

object (or a 2 x 4 board laid flat) on the

garage floor.

Using the Wall Station, activate the door

to the fully open position.

Place a 2 x 4 board flat on the garage

floor, under the door path.

Activate the door to the closed position

with the Wall Station. Upon contacting the

2 x 4 board, the door should stop, then

reverse direction within two seconds and

travel to the full open position.

If the door does not respond to the

required tests, repeat install routine Step

36 or 37, making sure the door is in the

fully closed position prior to activation.

Center Of Door

2 x 4 Laid Flat

On Floor

WARNING

Tools Needed:

2 x 4 Board

IF OPENER DOES NOT RESPOND PROPERLY TO THESE TESTS (STEPS

40 AND 41), HAVE A QUALIFIED SERVICE PERSON MAKE NECESSARY

ADJUSTMENTS/REPAIRS, OR SEVERE OR FATAL INJURY COULD

RESULT FROM OPERATING THE DOOR/OPENER.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 45 46

Comments to this Manuals

No comments

Wayne-Dalton Optimal Owner's Manual Page 32

Comments to this Manuals

Related products and manuals for Garage Door Opener Wayne-Dalton Optimal