Wayne-dalton 9800 User Manual download pdf (Page 23)

Tools Needed:

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com

none

Torsion Spring Assembly

NOTE: Right and left hand is always

determined from inside the building

looking out.

NOTE: Identify the springs provided as

either right hand wound (red winding

cone), which goes on the LEFT HAND

SIDE or left hand wound (black winding

cone), which goes on the RIGHT HAND

SIDE.

Facing the inside of the door, lay the

torsion tube on the ﬂoor. Lay the spring

with the black color coded winding

cone and the black color coded cable

drum, at the right hand end of the tube.

Lay the spring with the red color coded

winding cone and the red color coded

cable drum, at the left hand end of the

tube.

LEFT HAND

CABLE DRUM

RED

RIGHT HAND WOUND RED

WINDING CONE LEFT HAND SIDE

RIGHT HAND CABLE

DRUM BLACK

TORSION

TUBE

LEFT HAND WOUND BLACK

WINDING CONE RIGHT HAND SIDE

NYLON CENTER

BRACKET BUSHING

LEFT HAND CABLE

DRUM RED

RIGHT HAND WOUND

RED WINDING CONE

LEFT HAND SIDE

NYLON CENTER

BRACKET BUSHING

RIGHT

HAND

CABLE

DRUM

BLACK

TORSION

TUBE

LEFT HAND WOUND

BLACK WINDING CONE

RIGHT HAND SIDE

NOTE: The set screws used on all

torsion counterbalance winding cones

and cable drums, are now colored red.

DO NOT identify right and left hand by

the set screw color.

Slide the nylon center bushing onto the

torsion tube followed by the springs and

cable drums. The nylon center bushing,

springs and cable drums must be

positioned, as shown. With assistance,

pick up the torsion assembly and slide

one end of the tube through one end

bearing bracket. Lay the torsion tube

into the center bearing bracket and

slide the other end of the tube into the

opposite end bearing bracket. Position

the torsion tube so that equal amounts

of the tube extend from each end

bearing bracket.

TORSION

ASSEMBLY

CENTER

BRACKET

EQUAL

SPACING

END

BEARING

BRACKET

TORSION

ASSEMBLY

INSTALLATION

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

Comments to this Manuals

No comments

Wayne-dalton 9800 User Manual Page 23

Comments to this Manuals

Related products and manuals for Furniture Wayne-dalton 9800