Wayne-dalton 9800 User Manual download pdf (Page 29)

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com

Tools Needed:

Side Lock

Install the side lock on the second

section of the door. Secure the lock to

the section with (4) 1/4”- 20 x 11/16”

self drilling screws. Square the lock

assembly with the door section and

align with the square hole in the vertical

track. The side lock should be spaced

in approximately 1/8” from the section

edge.

IMPORTANT: SIDE LOCKS MUST BE

REMOVED OR MADE INOPERATIVE IN

THE UNLOCKED POSITION IF AN

OPERATOR IS INSTALLED ON THE DOOR.

NOTE: After completing this step,

continue with step 10 on page 17.

�

(4) 1/4”- 20 X 11/16”

SELF DRILLING SCREWS

1/8”

Power Drill

7/16” Socket

Driver

Pull Rope

NO. 6 SCEW EYE

PULL ROPE

BOTTOM BRACKET

PULL ROPE

WARNING

�

DO NOT INSTALL PULL ROPES

ON DOORS WITH ELECTRIC

OPERATORS. CHILDREN MAY

BECOME ENTANGLED IN THE

ROPE CAUSING SEVERE OR

FATAL INJURY.

Measure and mark the jamb

approximately 48” to 50” (1220 to 1270

mm) from floor on the right or left side

of jamb. Drill 1/8” pilot hole for No. 6

screw eye. Tie the pull rope to the No.

6 screw eye and to the bottom bracket

as shown.

OPTIONAL INSTALLATION

Power Drill

1/8” Drill Bit

1 2 ... 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments

Wayne-dalton 9800 User Manual Page 29

Comments to this Manuals

Related products and manuals for Furniture Wayne-dalton 9800