Wayne-Dalton Optimal Owner's Manual download pdf (Page 27)

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

TO AVOID POSSIBLE SEVERE OR FATAL

INJURY, MANUALLY DISCONNECT THE

OPENER, USING THE EMERGENCY

DISCONNECT HANDLE PRIOR TO

PROGRAMMING REMOTE CONTROLS.

a. Pull the Emergency Disconnect Handle

to the Manual Door Operated Position

(lower position).

b. On the front cover of the Opener, press

and release the Red Program Button;

the Opener will beep once, indicating

activation of the program mode. The

Opener will remain in Program Mode for

30 seconds. If at the end of 30 seconds

the Opener has not learned an RF

device, the Opener will beep once,

indicating the learn mode is no longer

active.

c. Press and hold the Wall Station light

button until the Opener beeps once. The

Wall Station is now programmed.

No beeping response from the Opener

during the Wall Station programming

indicates a programming failure. Repeat

programming Steps a-c.

d. Return the Emergency Disconnect

Handle to the Motor Operated Position

(upper position).

Note: The Opener can be activated by up

to six remote control devices (including

Wall Station, Transmitter, and Keyless Entry

Devices). If a seventh control is

programmed, the first of the program

controls will be overridden and will no

longer activate the Opener.

Programming Wall Station

Handle In Manual

Door Operated

Position

Red Program

Button

Motor in

Up Position

Handle In Motor

Operated

Position

LED

Light Button

WARNING

Tools Needed:

None

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

Comments to this Manuals

No comments

Wayne-Dalton Optimal Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for Garage Door Opener Wayne-Dalton Optimal