Wayne-Dalton Optimal Owner's Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
24
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Tools Needed:
6” Height Object
WHEN PERFORMING THIS PART OF THE
TEST, DO NOT PLACE YOURSELF UNDER
DESCENDING DOOR, OR SEVERE OR
FATAL INJURY MAY RESULT.
Starting with the door fully open, place
a 6” high object on the floor, in line with
sensors, one foot from the left side of
the door.
Activation of the Opener with the Wall
Station Up/Down Button should cause the
door to move no more than one foot, stop
and then reverse to fully open position.
Repeat this test with the 6” high object
placed at the center of the door and then
one foot from the right side of the door.
The 6” high object, when placed on the
floor in line with sensors, while door is
closing, should also cause the door to
reverse.
Testing the Safety Sensors
(If Installed)
Lock Arm Installation
(Continued)
Once Track radius has been identified,
secure the Lock Arm to the Motor with
(1) 5mm x .8mm Phillips Pan Head Screw.
NOTE: If unsure of track radius, begin with
Lock Arm in position 1.
After assembly of the Lock Arm, manually
raise and lower the door and verify that the
Lock Arm does not interfere with the door. If
there is interference between the door and
the Lock Arm, see Page 35 for Lock Arm
troubleshooting.
NOTE: Do not operate the door if there
is interference between the Lock Arm and
the door.
Reconnect the door to the Motor operated
position. Activate a Motor operated up/down
cycle to confirm clearance.
Lock Arm
Motor
5mm x 8mm
Phillips
Pan Screw
12”
6”
12”
IF OPENER DOES NOT RESPOND PROPERLY TO THESE TESTS (STEPS
40 AND 41), HAVE A QUALIFIED SERVICE PERSON MAKE NECESSARY
ADJUSTMENTS/REPAIRS, OR SEVERE OR FATAL INJURY COULD RESULT
FROM OPERATING THE DOOR/OPENER.
Tools Needed:
Phillips Head
Screwdriver
WARNING
WARNING
40
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

Comments to this Manuals

No comments