Wayne-Dalton Optimal Owner's Manual download pdf (Page 33)

Large Button

Red Program

Button

Motor in

Up Position

Manual Operated Position

Motor operated position

Programming Transmitter

WARNING

Tools Needed:

None

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

TO AVOID POSSIBLE SEVERE OR FATAL

INJURY, MANUALLY DISCONNECT THE

OPENER, USING THE EMERGENCY

HANDLE PRIOR TO PROGRAMMING

REMOTE CONTROLS.

a. Pull the Emergency Disconnect Handle

to the Manual Door Operated Position

(lower position).

b. On the front cover of the Opener,

press and release the Red Program

Button: The Opener will beep once,

indicating activation of the program

mode. The Opener will remain in

program mode for 30 seconds. If at

the end of 30 seconds the Opener has

not learned an RF device, the Opener

will beep once; indicating the learn

mode is no longer active.

c. Press and hold the desired Transmitter

button until the Opener beeps once.

The Transmitter is now programmed.

No beeping response of the Opener

during the Transmitter programming

indicates a programming failure. Repeat

programming procedure b and c.

d. Return the Emergency Disconnect

Handle to the Motor Operated Position

(upper position).

NOTE: The first Transmitter command

after programming will only move the

door through a six inch up/down cycle.

Normal door operations will occur on the

second use of the Transmitter.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 45 46

Comments to this Manuals

No comments

Wayne-Dalton Optimal Owner's Manual Page 33

Comments to this Manuals

Related products and manuals for Garage Door Opener Wayne-Dalton Optimal